Helical suspension clamp, type СП-Dпр-6А

Helical suspension clamp, type СП-Dпр-6А (with the tray with a grounding lug) is used for fixing of steel-aluminum conductors, ground wires and all-dielectric self-supporting fiber-optic cable (ADSS) to OTL towers.

Suspension clamp, type СП-Dпр-6A consists of:

  • armor rods made of separate wire spirals or strands;
  • two power strands one of which has left lay and another the right lay;
  • steel galvanized tray with grounding lag which is compatible with the standard line accessories;
  • fixture (pin, washer, and dowel).

Helical suspension clamp, type СП-Dпр-6A (with additional armor rods) also includes additional armor rods.

In case the clamp, type СП-Dпр-6A is intended for stringing of OPGW, the place order for manufacture shall indicate:

  • OPGW make;
  • outside diameter of OPGW , mm;
  • maximum length of span, m.
Mark “ALIT” Mark of a wire (rope) D wires (rope), mm В, mm Length is L of a protector, mm Length is L1 of a power strand,mm
СП-9,1-6А С 50 9,1 17 1700 1300
СП-11,0-6А С 70 11 17 1700 1300
СП-9,6-6А АС 50/8 9,6 17 1300 800
СП-11,4-6А АС 70/11 11,4 20 1600 800
СП-13,3-6А АЖС 70/39 13,3 20 1700 1300
СП-13,5-6А АС 95/16 13,5 20 1700 1300
СП-15,2-6А АС 120/19 15,2 30 1800 1300
СП-15,4-6А АС 120/27 15,4 30 1800 1300
СП-15,4/11-6А АС70/72 15,4 30 1800 1300
СП-16,8-6А АС 150/19 16,8 30 1800 1300
СП-17,1-6А АС 150/24 17,1 30 1800 1300
СП-17,5-6А АС 150/34 17,5 30 1800 1300
СП-18,9-6А АС 185/24 18,9 30 1800 1300
СП-18,8-6А АС 185/29 18,8 30 1800 1300
СП-19,6-6А АС 185/43 19,6 30 1800 1300

Technical parameters of helical suspension clamp, type СП-Dпр-6А for OPGW

Mark “ALIT” Analog of a clamp Application with a length of flights  Field of application
СП-Dпр-6А to 450m. OPGW
ПСО-Dmin/DmaxП-35;
СП-Dпр-6А (with additional armor rods) ПСО-Dmin/DmaxП-42; more 450m.
ПСО-Dmin/DmaxП-43;