Hardware terminal clamps, type A1M
Hardware terminal clamps, type A1M (with a single-hole pad) are intended for connection of one copper conductor to equipment terminals during switchgear installation. Hardware terminal clamps have better performance indicators since they do not require periodic tightening of bolts. Hardware terminal clamps, type A1M meet the requirements of TU U 31.2-30255335- 002:2006.
| Mark | Wire mark | Wire diameter, mm | Dimensions, mm | Compression matrix | Weight, kg | |||||
| d | D | В1 | B | І | Н | |||||
| А1М-35-2 | 35 | 7,5 | 10 | 16 | 40 | 13 | 60 | 4 | А-13 | 0,15 |
| А1М-50-2 | 50 | 9 | 11 | 18 | 40 | 15 | 60 | 4 | А-15 | 0,19 |
| А1М-70-2 | 70 | 10,7 | 12 | 20 | 40 | 17 | 70 | 4 | С-17 | 0,24 |
| А1М-95-2 | 95 | 12,6 | 14 | 23 | 40 | 19 | 70 | 5 | С-19 | 0,32 |
| А1М-120-2 | 120 | 14 | 16 | 26 | 40 | 21 | 80 | 5 | С-21 | 0,40 |
| А1М-150-2 | 150 | 15,8 | 18 | 28 | 40 | 23 | 80 | 5 | С-23 | 0,45 |
| А1М-185-2 | 185 | 17,6 | 20 | 30 | 40 | 26 | 90 | 5 | А-26 | 0,53 |
| А1М-240-2 | 240 | 19,9 | 22 | 34 | 60 | 29 | 100 | 8 | А-29 | 0,85 |
| А1М-300-2 | 300 | 22,1 | 24 | 36 | 60 | 31 | 100 | 8 | С-31,5 | 1,08 |
| А1М-400-2 | 400 | 25,5 | 28 | 42 | 60 | 36 | 120 | 8 | А-36 | 1,50 |
